BedLocker Matte Finish

You can open or close the BedLocker Electric retractable cover with just the touch of a button. The cover can be stopped at any point along the rails to give you just the amount of coverage that your cargo requires. It’s flush-fit mount makes it easy to clean and gives it a sleek, streamlined look. Matte Finish.


Starting At: $2,478.00

Buy Now Find A Dealer
BedLocker Matte
BedLocker Matte
Matte Finish
BedLocker Canister

The Original BedLocker, now in a Matte Finish! Get all the functionality of the BedLocker Electric with the stylish matte-black rails and panels. Operated via remote control, this innovative electric cover opens and closes at the touch of a button in less than 30 seconds and can be stopped at any point along the rails.

  • Electric motor operated via remote. Manual switch kit can be purchased as an option.
  • Low profile top cover lays flush with the rails.
  • Mounts with a clamp-in design—no drilling required.
  • Cover rolls into contoured canister (10.25”w x 12”d).
  • Flat Matte-black finish with aluminum panels interlocked with a silicon hinge seal.


  • Hands-free, remote operation.
  • Retracts into canister at the front of the truck bed.
  • Durable black powder-coat finish on rigid aluminum panels.
  • Patented silicon weather hinge provides a tight seal between the aluminum panels.
  • Optional manual switches can be mounted in the cab or back by the tailgate.
  • Electro-magnetic brake locks cover in any position.
  • Electric motor wires to your truck battery.
  • Drive System release lever provides cover operation in case of lost power.
  • No-drill, clamp-in design for installation in about an hour.
  • Low-profile, aerodynamic design saves gas.
  • Fits over most 5th wheel trailer hitches. (Highest point of the 5th wheel hitch must be 2" below the bed rails)
  • Three year limited warranty.
  • Matte finish.


ATTN: State of California Consumers
warning symbolWARNING: Cancer and Reproductive Harm (

Installation & Warranty

BEDLOCKER Matte Standard Install Instructions 


Full instructions and phone support are included with all orders on all models.



PACE EDWARDS (hereinafter referred to as the MFG.) warrants each new Pace Edwards BedLocker®, JackRabbit™, Full-Metal-JackRabbit™, UltraGroove, UltraGroove Metal, UltraGroove Electric, and Switchblade* and Switchblade Metal retractable truck bed cover to the original owner as follows:


  • Delamination of the ArmorTek deck
  • Separation of the BedLocker/Full Metal deck panels
  • Failure of the Continuous Tension Spring
  • Failure of the BedLocker drive system
  • All lock assemblies
  • All hardware and components


  • Rips, tears, or discoloration of the ArmorTek deck material
  • Seals and gaskets
  • Water intrusion from any source
  • Dealer and/or purchaser installed parts and accessories


These conditions include:

  • Use for any purpose other than normal private use including rental and promotion
  • Altering the retractable truck bed cover in any manner without written approval of the MFG
  • Misuse, negligence or accident
  • Installation of any part or accessory without written approval from the MFG
  • Failure to register this warranty with the MFG within fourteen (14) days from date of delivery


This warranty is subject to certain conditions and limitations including, but not limited to, the following:

  • Any part of a Pace Edwards retractable truck bed cover that is found to be defective under the terms of this warranty will be repaired or replaced using either new or reconditioned parts at the discretion of the MFG.
  • In determining what constitutes a failure under the terms of this warranty the decision of the MFG shall be final.
  • This warranty is extended to the original purchaser only and is not transferable to subsequent purchasers.
  • The MFG does not accept any responsibility in connection with the installation of any of its products by its dealers or agents.
  • The MFG does not undertake responsibility to any purchaser for warranty express or implied by any of its dealers, distributors or agents beyond that which is contained herein.
  • Without regard to an alleged defect of its products the MFG under any circumstances does not assume responsibility for loss of time, inconvenience, revenue, or other consequential damage including, but not limited to, expenses for telephone, food, lodging, travel, loss or damage to the vehicle the products are installed on or loss or damage to personal property of the purchaser or user of the products.
  • The MFG reserves the right to make changes in the design of, improvements to, or warranty of its products without imposing any obligation upon itself to provide the same for any products theretofore manufactured.
  • Switchblade retractable tonneau covers feature a one (1) year limited warranty. 

Some jurisdictions do not allow limitations on or exclusions to warranties, therefore some of the exclusions may not apply to you. This warranty affords you specific legal rights. You may have other legal rights that may vary from jurisdiction to jurisdiction.


If a part fails, the purchaser should return to the selling dealer to determine if the failed part is covered under the terms of this warranty. If a Warranty Claim is necessary, the dealer will contact Pace Edwards to obtain A Return Goods Authorization. If it is impractical for the purchaser to return to the selling dealer, then the purchaser may contact the Pace Edwards Technical Assistance Help Desk at 1-800-338-3697 to determine warranty eligibility. In either event, it is the responsibility of the purchaser to obtain a Return Goods Authorization prior to returning the defective part to the MFG.

The defective part, along with a copy of the original Bill of Sale and the Pace Edwards issued RGA #, must be returned PREPAID to Pace Edwards Co. 2400 Commercial Blvd. Centralia, WA 98531. After determining the validity of the warranty claim, PACE EDWARDS will ship a replacement part prepaid to the customer. Labor costs to replace defective parts are the responsibility of the purchaser.

For your convenience, you can register your warranty on this site. This will help expedite your warranty claim. If you need warranty assistance, please call 1-800-338-3697 and one of our technical service reps will be happy to help you. Please have your model and serial numbers and your original sales receipt handy when you call. For written inquiries, please send a letter with the warranty requirements information (listed in the box above) to:

Pace Edwards Company
Warranty Claims Department
2400 Commercial Blvd.
Centralia WA 98531


Because these are built to order covers, products ship approximately 7-10 working days after ordering. All covers ship UPS Ground, in 2 packages (1 for rails, 1 for Canister/Cover).

See our Shipping and Returns page for full details

How to Measure Your Truck Bed

In order to ensure a proper fit, please measure your truck bed prior to purchasing your new LEER tonneau cover.

Measuring Your Truck Bed:

1. Place the end of your measuring tape at the bulkhead of your truck bed.

2. Moving down your bed rail, measure to the inside edge of the top of your tailgate.

3. Most truck manufacturers round their bed sizes, so choose the option in the fitment bar that is closest to your measurement.


2019 BedLocker® Jobber/Application Guide  
  CHEVY/ GMC    
2020 Silverado/Sierra HD 6 '5" M-BLCA34A65
2019 Silverado/Sierra 1500 Crew Cab  5' 8" M-BLCA27A58
2019 Silverado/Sierra 6' 6" M-BLCA28A59
15-19 Colorado/Canyon Crew Cab  5' 2" M-BLCA03A25
15-19 Colorado/Canyon  6' 2" M-BLCA04A26
04-18 Silverado 1500 Crew Cab  5' 8" M-BLC3250
14-18 Silverado/Sierra 1500 & 2015 HD - ’19 GMC Sierra LIMITED 6' 6" M-BLC95A17
14-18 Silverado/Sierra 1500 & 2015 Heavy Duty 8' M-BLC9636
04-18 Silverado HD 2500/3500 Dual Rear Wheel  8' M-BLC8569
04-14 Colorado/Canyon 6' N/A
88-13 C/K/Silverado, Heavy Duty^, & '14 Heavy Duty 6' 6" M-BLC0303
2019 Ram with Rambox 5' 7" M-BLDA32A63
2019 Ram 1500 5' 7" M-BLDA24A55
2019 Ram 1500 6' 4" M-BLDA25A56
09-18 Ram & 2019 1500 Classic 5' 6" M-BLD77A01
09-18 Ram & '19 1500 Classic & '19 HD 6' 3" M-BLD7833
09-18 Ram & '19 1500 Classic & '19 HD 8' M-BLD7936
09-18 Ram w/Ram box 5' 6" N/A
12-18 Ram w/Ram box 6' 4" N/A
2019 Ranger SuperCrew 5' M-BLFA30A61
2019 Ranger 6' M-BLFA31A62
17-19  F-Series Super Duty 6' 9" M-BLFA18A44
17-19  F-Series Super Duty 8' 1" M-BLFA19A45
15-19 Super Crew / SuperCab  5' 6" M-BLFA05A28
15-19 F-Series LightDuty 6' 5" M-BLFA06A29
15-19 F-Series LightDuty 8' M-BLFA07A30
08-16 F-Series Super Duty 6' 9" M-BLF6985
08-16 F-Series Super Duty 8' 1" M-BLF7084
16-19 Titan (*1) 5' 6" M-BLNA14A40
16-19 Titan & Titan XD (*1) 6'5" M-BLNA15A41
16-19 Titan & Titan XD (*1) 8' 1" M-BLNA16A42
05-19 Frontier Crew Cab (*1) 4' 10" M-BLN5780
16-19 Tacoma Double Cab (*2) 5' 1" M-BLTA10A38
16-19 Tacoma Standard & Access Cabs (*3) 6' 2" M-BLTA09A37
07-19 Tundra CrewMax (*2) 5' 5" M-BLT5379
07-19 Tundra Regular & Double Cab (*2) 6' 5" M-BLT5173
07-19 Tundra Regular & Double Cab (*2) 8' M-BLT5274


^ Excludes '01-02 Pro-Tec composite box
* Tonneau cover impedes operation of OE Bed Extender option.
** 88-06 Chevy Stepside requires drilling holes to mount Rails.
**** 08 Dodge Dakota requires removal of optional cargo management tie down bars.
(*1) Will impede the use of the optional factory Utili-Track System
(*2) Will impede the use of the optional factory Deck Rail System
(*3) Will require the removal of the front tie down hooks
(*4) Will impede the use of the optional factory cargo management system